Products

Intake systems are provided to customer specifications. LoTec will work extremely close with their customer to make sure every requirement is met. Design parameters include pressure drop, filtration efficiency, and volume flow. Specific components such as humidity control, evaporative-cooling, and mass flow augmentation can be added to meet a specific goal. In addition, if there is compressor bleed-air available, LoTec can provide anti-icing at the inlet filter.

Not all applications are created equal; however, the goal of all filters is: Keep the dirt out! The most common type of filter is a barrier type, which typically is just an element with a pre-filter that sits in some type of a holding frame. They come in various styles and configurations relative to the media and replacement schemes. In addition, they tend to be less money per CFM and thus more common.

There is no such thing as a filter that gets out everything, though. That is why LoTec suggests a wash system. However, wash systems are not a substitution for filtration.

Desert environments typically have a high dust load in the air, which is made up of larger particles that are dry. An effective filter for this application is a pulse cleaning system. However, dry is the key word because if you have moisture or industrial emissions, ie: vehicular traffic, you introduce pollutants into the air that create a sticky ‘dirt cake.’ Dirt cakes will not pulse-off as well, degrading the value of the pulse filter system. Pulse clean filters are also good in an environment that has frost. Light frost can be pulsed-off the media, allowing for lower operating pressure drops in cold/frosty conditions. Therefore, LoTec will work very close with their customers to ensure they receive the optimum system for their situation.

Feel free to call if you would like to discuss your particular pulse filtration situation, LoTec would be happy to get you some help. (972) 462-7884.

Equipment enclosures are an essential element to an overall quiet system. LoTec designs equipment that ranges from tight fitting, skid based enclosures to large buildings that go around the equipment and are free standing to grade. Their construction can vary from the acoustical metal building type to the heavier seal-welded plate and perforated metal type. Skid based units tend to be limited to shipping sizes, while off-skid enclosures are not as limited in size. LoTec can modify an existing enclosure or start from scratch and create a signature enclosure depending on the customer’s needs.

Feel free to call if you would like to discuss your particular enclosure situation, LoTec would be happy to get you some help. (972) 462-7884.

Equipment enclosures are an essential element to an overall quite system. LoTec designs equipment that ranges from tight fitting, skid based enclosures to large buildings that go around the equipment and are free standing to grade. Their construction can vary from the acoustical metal building type to the heavier seal-welded plate and perforated metal type. Skid based units tend to be limited to shipping sizes, while off-skid enclosures are not as limited in size. LoTec can modify an existing enclosure or start from scratch and create a signature enclosure depending on the customer’s needs.

Feel free to call if you would like to discuss your particular enclosure situation, LoTec would be happy to get you some help. (972) 462-7884.

Equipment enclosures are an essential element to an overall quite system. LoTec designs equipment that ranges from tight fitting, skid based enclosures to large buildings that go around the equipment and are free standing to grade. Their construction can vary from the acoustical metal building type to the heavier seal-welded plate and perforated metal type. Skid based units tend to be limited to shipping sizes, while off-skid enclosures are not as limited in size. LoTec can modify an existing enclosure or start from scratch and create a signature enclosure depending on the customer’s needs.

Feel free to call if you would like to discuss your particular enclosure situation, LoTec would be happy to get you some help. (972) 462-7884.

Noise ranging from engine exhausts to starters can be a huge headache for both site managers and local neighbors. That is why LoTec offers a variety of silencer products that are usually site specific. Our specialists can visit the site and determine the best solution or meet a specification given by the customer. Whether the sound originates in the high frequency or the low, we have a silencer to offer.

Feel free to call if you would like to discuss your particular silencer situation, LoTec would be happy to get you some help. (972) 462-7884.

Virtually every enclosure needs some type of air movement, which is why LoTec also provides ventilation systems. Depending on the application, the system can include filtration, silencing, fans, louvers, volume control, dampers, and more. The amount of noise reduction, pressure loss, and construction geometry are varied to match the individual project needs.

Feel free to call if you would like to discuss your particular ventilation system situation, LoTec would be happy to get you some help. (972) 462-7884.